Toshiba 46vx700u Mode D'Emploi

• If the router/AP does not support PBC or WPS, Easy 

Setup (PBC) will not work even if the push-button is 
pressed.

• If available router/AP list is not displayed in Easy Setup 

(PIN) or Assisted Setup, the power of router/AP may be 
OFF. Check that it is ON, and then try re-starting the scan 
for available routers/APs.

• Refer to the router/AP instruction manual.

NET TV or Widget problems

• If the date and time display on the NET TV menu is 

wrong, turn off the TV, and turn it on again.

• NET TV or Widgets may not be available after turning the 

TV on while the system is booting.

• NET TV and Widgets are not available if Game or PC 

mode is selected on the TV.

• Content delivered by NET TV or Widgets are the 

responsibility of the Contents Service Provider. Contact 
the Service Provider to discuss any content issues. 

Media Player problems

• Ensure that the devices (Display and Server) are 

connected correctly.

• Incorrect behavior may occur when using a USB HUB 

connection.

• The size of pictures stored in the DMS may be 

automatically changed by the DMS and improperly 
displayed. This is a result of the DMS.

• Photo files that were processed and edited by using PC’s 

application software may not be able to be viewed.

• When viewing content that supports two or more 

formats the display may select one format automatically.

• Copyright protected contents stored in the DMS may not 

be able to be played on the display.

• Content playback stability may be affected by heavy 

network traffic.

• Contents originally recorded on a PC may not play 

correctly.

• Set the media sharing of the DMS correctly, according to 

the DMS instruction manual.

• Confirm that the contents of either the DMS or the USB 

storage device are in formats that are supported by this 
TV (

- p. 71, 72, or 74).

• Depending on the DMS, access may be limited by the 

MAC address. Set the server according to the DMS’s 
instruction manual. This TV’s MAC Address can be 
confirmed in the Network Setup portion of the User 
Menu (

- p. 59).

• Depending on the DMS, it may take time to display the 

list.

• Depending the state of this TV, DMC may not be able to 

control a DMR playback.

• If DMR playback starts regardless of the user's intention, 

check the access control of DMS or set Media Renderer 
to Off.

LED indications

The POWER and On Timer LED lights on the front of 
the TV indicate the TV’s status, as described below.

The TV is operating properly.

The power is off or the TV is in standby.

Fan Stopped. Turn off the TV and unplug the power 
cord. Plug the power cord in again and turn on the TV.

Power-On Failure. Turn off the TV and unplug the 
power cord. Plug the power cord in again and turn on 
the TV.

“Adjusting POWER LED’s Dimmer” (- p. 43).

Sensor is available.

On Timer is set.

Abnormal operation of BUS line. Turn off the TV and 
unplug the power cord. Plug the power cord in again 
and turn on the TV.

After trying the solutions, if the problem persists:
•In the U.S., visit TACP Consumer Solutions on the 

web at www.tacp.toshiba.com/customersupport/ 
or call 1-800-631-3811.

•In Canada, locate the nearest Toshiba authorized 

service depot by directing your web browser to 
www.toshiba.ca

; click “Home Entertainment,” and 

then click “Support.”

Power

Touch Sensor

INPUT

MENU

On Timer

VOL

CH

VX700U_EN.pdf   78

2010/08/11   9:27:59