Jabra SP500 Manuel D’Utilisation

Page de 20
2
En
g
lis
h
3
En
g
lis
h
Thank you for purchasing a Jabra SP500, the most versatile Bluetooth 
speakerphone on the market. Jabra has become the market leader in hands-
free communication products through the innovation and performance of our 
products. The Jabra SP500 is designed to perform superbly in any location – in 
the car, the home or the office.
Thank you
Several studies have shown that cell phone usage while driving creates a 
distraction to the driver which may increase the likelihood of an accident. 
This distraction potential is not eliminated by the use of a hands-free phone. 
Hands-free phones have not been shown to be safer than hand-held phones 
with respect to driver distraction. When using the phone while driving, 
keep conversations short and resist any temptation to make notes or read 
documents. Before answering calls consider your circumstances. Pull off the 
road and park before making or answering calls when driving conditions 
require (e.g. bad weather, high traffic density, presence of children in the car, 
difficult junctions or maneuvers.)
Remember, driving comes first, not the call!
Abide by local laws.
Please check if the local laws where you live restrict the use of mobile phones 
while driving. It is the owner’s responsibility to use this product in compliance 
with the laws of the place where you live.
Drive safely
1  Multi-function Button   
2  Indicator Light (Blue/Yellow/Red)
3  Volume Control
4  Mute Button
5  Microphone Boom
6  Pairing Button
7  Charging Socket
8  Speaker 
Jabra SP500 Overview
!
Check for phone compatibility
1
BEFORE USING YOUR SPEAKERPHONE
The Jabra SP500 is compatible with most Bluetooth¹ (see Glossary) mobile phones. 
You can check whether your phone has Bluetooth capability by visiting your phone 
manufacturer’s web site or Jabra’s web site (http://www.Jabra.com/JabraCMS/NA/
EN/MainMenu/Products/ProductFinder.htm) which has complete information on 
compatibility.
The Jabra SP500 comes complete with two 1.2-volt (AA 2000 mAh) 
rechargeable batteries that must be fully charged before you use the 
speakerphone for the first time.
1.   Important:  Remove the battery's protective plastic sheet to activate the 
batteries. (See fig. 1.  )
2.   Plug the adapter jack into the speakerphone and the AC adapter or the 
vehicle power charger into a power socket. (See fig. 1.  )
3.   The red light will turn on when charging begins. After approximately two 
hours, the red light will go out indicating that the Jabra SP500 is fully 
charged.  
4.   Unplug the AC adapter or the vehicle power charger from the 
speakerphone.
5.   You are now ready to “pair” the Jabra SP500 with your mobile phone. (See 
section 4)
6.   Low power status is indicated by the yellow LED light flashing. Recharge 
the SP500 with the AC adapter or vehicle power charger.
   WARNING: Using another AC adapter other than the one provided may 
damage or destroy the speakerphone. We recommend that you use the 
rechargeable batteries supplied but you can use other brands. You cannot 
use non-rechargeable batteries in your Jabra SP500.
Charge the batteries 
2
Switching on the Jabra SP500
3
Switch on the Jabra SP500
1.   Press and hold the multifunction button 
 until you hear the start up 
melody and the blue LED light flashes three times. When the speakerphone 
is in standby mode, the blue LED light flashes every three seconds.
 
 
Please note that the blue light will automatically switch off after one minute in order to 
save power and to not distract when driving at night. The light will be re-activated upon 
any key press.