Netopia 2e-h Mode D'Emploi
Cayman 2E-H User’s Guide
Diagnostic Console
November 2000
B-5
help [command] or command ?
The
help
command displays a summary of the available commands.
The
help
command displays the syntax and function of the
command you specify.
To access an overview of the diagnostic console commands, type
help
or
?
at the console prompt. To access on-line help for a specific
command, type
help
command
or
command ?
at the console
prompt. For example, the console command
file ?
returns the
following:
BootPROM> file ?
usage: file <file-name>
specifies the file to be retrieved from a server.
Filenames containing whitespace may be enclosed in
double quotes (``). Also, whitespace may be quoted with
a ^ character, and special characters may be entered in
hex, following a leading ^x sequence.
Administration
Commands
Commands
The following commands configure the Cayman 2E-H restart
settings.
settings.
boot [{ flash | tftp | bootp }] [nogo]
If you do not enter an argument, the
boot
command causes the
Cayman 2E-H to behave as if it had been powered up with autoboot
enabled. That is, it will try to download its image from flash, TFTP,
and BOOTP (if enabled) in that order.
enabled. That is, it will try to download its image from flash, TFTP,
and BOOTP (if enabled) in that order.
If you enter a
flash
,
tftp
, or
bootp
argument for the
boot
command, the Cayman 2E-H attempts to download its image from
the specified download source.
the specified download source.
If you include the optional
nogo
argument for a boot command,
control is not transferred to the image after it is loaded.