Quantum DLT-S4 Mode D'Emploi
Chapter 11 Installing an Internal SAS Tape Drive
Equipment Required
DLT-S4 Product Manual
90
Equipment Required
11
You need the following items to install the tape drive in a system:
• Four (4) M3 x 8 mm long screws
• Screwdriver
• SAS cable
• Four (4) M3 x 8 mm long screws
• Screwdriver
• SAS cable
Installation Steps
11
To install the tape drive, perform the following tasks in this order. Each
task is described in detail on the pages listed below.
Step No.
Step
Page
1
Unpack the tape drive.
2
Secure the tape drive in the system.
3
Connect the cables.
4
Confirm the installation.
5
Add additional devices (optional).