Mitsubishi wd-52527 Manuel Du Propriétaire

Display programs from analog channels, analog inputs 
or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP).  The TV has a second analog 
tuner for non-scrambled analog channels received on 

Ant-1 and will display them as the PIP/POP sub-pictures.  

Digital channels and devices can be shown as the main 
picture but cannot be the sub-picture.  To turn PIP/POP 
off, wait at least 10 seconds, and press PIP/POP.  The 
next time you activate PIP/POP, the last used PIP/POP 
option will be displayed. 

Press PIP DEVICE to change the PIP or POP picture 
source device.  A menu similar to the Device Selection 
menu will be displayed.

Press PIP CH to scroll up and down through memorized 
channels on Ant-1 or a cable box.

Press ENTER/EXCH (WD-52527, WD-62527) or EXCH 
(WD-52528, WD-62528) to exchange the main picture 
and the PIP/POP picture.  Pictures from digital channels 
can only be shown as the main picture.

If no menus are on the screen, press ADJUST  ,  , 

 or   to move the PIP display anywhere on the main 

screen.

(WD-52528, WD-62528)
When automatic POP switching is active, the TV will 
cycle through memorized analog channels on Ant-1 or 

strobe pictures from other A/V components in the POP 
display.  Press PAUSE to pause or restart automatic 
POP switching.

(WD-52528, WD-62628)
Press PAUSE to stop automatic cycling through 
channels, then press ADJUST  ,  ,   or   to select a 
different POP “live” image.

Press PAUSE to freeze the PIP and side-by-side images.  
Press PAUSE again to return to a “live” image. 

Press PIP/POP to activate the PIP/POP option.  With 
each press of the PIP/POP button on the TV remote 
control (within 3 seconds of each other), the PIP/POP will 
cycle through the following display options:

MAIN

PICTURE

Side-by-Side

side-by-side 
pictures

MAIN

PICTURE

POP 1

POP 2

POP 3

(WD-52528, 
WD—62528)

PIP Ant-1 17

Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1

PIP

Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1