Mitsubishi wd-52527 Manuel Du Propriétaire

To select another device or input, press ADJUST  ,  ,   

or    on the TV’s remote to move the highlight.  Press 
ENTER to select the device to view and hear.  The TV 
inputs are automatically changed.  If NetCommand 
is set up, the inputs on compatible A/V receivers are 
automatically changed at the same time.

Devices that have separate On and Off remote control 
buttons will power On automatically when you select 
the device and will power Off when you turn off the TV.  
For devices that do not power On or Off automatically, 
display the Device Selection menu, press ADJUST   
or    to highlight the device icon and press POWER on 
the remote control.  For the A/V receiver, press AUDIO 
to move the navigation to the Audio Section.  Highlight 
the  A/V receiver icon and press POWER.  If you press 
POWER on the remote control when the Device Selection 
menu is not displayed, the TV will turn Off.

The TV icon shows the destination for the device 

highlighted in the Device Section.

The Connection Section shows the other devices 

currently connected to the device highlighted in the 
Device Section.  For example, if the Digital VCR (D-VCR) 
is currently recording, when you move the highlight to the 

Ant-1 icon, the D-VCR icon will appear in the Connection 

Section.  This icon will disappear when you move 
the highlight to another icon.  Press CANCEL to stop 

recording. 

When a NetCommand® pre-memorized or learned IR 
controlled A/V receiver has been connected to the TV 
and added to NetCommand Setup, an AVR icon will 
appear in the audio section.  Press AUDIO  to change 

navigation to the audio section.  Then press ADJUST 

,  ,   or   to select the TV speakers icon or the 

A/V receiver icon.  Press ENTER to change the audio 

selection.  Press DEVICE to return the navigation to the 
Device Section.

When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 7) displays.  If NetCommand® 

has not been set up, the Device Selection menu allows you to select an input for viewing.  If NetCommand is set up, the 
Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or A/V receiver, 
power compatible devices On or Off, and verify the destination of signals. On the Device Section menu, the device or 
input currently displayed appears as a gold-colored icon.   

The PIP Selection menu displays when you press the PIP 

DEVICE button on the remote control.  This menu has the 
same general format as the Device Selection menu.  The 
source for the Video Section is the sub picture and the 

Audio and Connection Sections are not available.

Use ADJUST  ,  ,   or    to move the highlight to the 
device to show in the PIP or POP screen, then press 
ENTER.  Device icons that are grayed out are not available 
for use as PIP/POP sources or with the current source.