Mitsubishi wd-52527 Manuel Du Propriétaire

Use the Setup menu to select English or Spanish as 
the language for the menus and on-screen displays.  
Manually set the time for the TV, or select Auto and the 

TV will automatically set the time based upon Extended 

Data Service (XDS) time data.  This time data is usually 
broadcast by your local PBS station. This menu is also 
used to set the TV timer.  This menu also resets the lamp 
reminder.  The TV’s software version is also found on this 
screen. 

Edit channels for Ant-1 and Ant-2.  After memorization, 
if a channel displays as digital and analog, you can 
choose to see the channel digitally every time it is 
selected.  Manually add or delete channels from memory, 
name channels or add your favorite channels to a SQV 
(SuperQuickView™) list.  Displays signal strength of 
channels.

Display Closed Captions if sent by the broadcaster, 
select settings for analog or digital captions.  

Block or allow programing based upon rating signals 
sent by the broadcast station, lock by time, or lock the 
front panel buttons.

Reset the A/V Memory to return to the original factory  

A/V settings for a selected device. Customize the 

individual audio and video settings.  Display a blue 
screen when viewing a device with no signal, select Film 
Mode, or turn the TV speakers On or Off.  

Add, change, review or delete NetCommand® settings 
and devices.  Change TV Guide On Screen® ZIP code 
and input selection settings.  Change the order of icons 
on the Device Selection menu.  Turn the transport menu 
off and select the channel that your cable box tunes to.

Set up and view recordings and recording defaults. View 
your customized Record List. If you have more than one 
digital recording device connected, use this menu to 
change the default digital Record To device.  Set analog 

recording picture size and quality.