Mitsubishi wd-52527 Manuel Du Propriétaire

To view a V-Chip blocked program or to watch the 

program during a scheduled lock time, you must enter 
your four-digit pass code or change the channel to an 
unlocked program.  Once you have entered the pass 
code, the V-Chip block for that channel or Lock by Time 
will remain released until the TV is powered Off and then 

On again.

Select V-Chip Lock to perform the functions listed below.  
V-Chip allows you to Block or Allow programs based 
upon rating signals sent by the broadcaster.  The TV 
comes from the factory with the V-Chip Lock in the Off 
setting.  

You can turn the V-Chip on within the V-Chip Menu or 

you can use the V-CHIP button on the remote control to 
conveniently turn the V-CHIP on or off.  

The factory preset is TV-PG for TV ratings or PG for 

movie ratings, allowing only programs rated TV-PG/PG 

or lower.  You can change the blocking level to various 

TV ratings and lettered categories or movie ratings.  After 

changing channels or devices, there may be up to a 5 
second delay before the V-Chip lock takes effect.

You will see the screen shown in Figure 20 when you 

press V-CHIP on the remote control, the first time you 
select the V-Chip Lock menu, or after you have canceled 
your pass code.  To use the Lock, input a four-digit pass 
code with the number buttons on the remote control, then 
press ENTER.  You can delete a number and move back 
one space by pressing CANCEL.  You can exit without 
inputting a pass code by pressing MENU or HOME.

After setting a pass code, the V-Chip Lock is active.  The 

next time you select V-Chip Lock you will see “...enter 

your pass code” instead of “...enter a new pass code.” 

V-CHIP is OFF.

The rating is set to

TV-PG

To turn V-Chip on, enter new passcode.

– – – –

Use the NUMBER buttons and press ENTER.

Select the times you would like the V-Chip to be active.  
By setting the V-Chip Start Time and V-Chip Stop Time to 
the same time, the V-Chip will be active 24 hours a day.

Press ADJUST   or    to slowly select the time, starting 
with the hours.  Press and hold ADJUST   or   to 
quickly select the hours, press ADJUST   to select the 
minutes.

Channel is locked.

V-Chip locked the program because the rating is

TV-PG DSLV

To watch the program, Enter your passcode.

– – – –

Use the NUMBER buttons and press ENTER.