Mitsubishi ws-48513 Manuel Du Propriétaire

50

51

Device Selection Menu

Audio Section

When a NetCommand pre-memorized or learned IR 
controlled A/V Receiver, or HAVi amplifier has been 
connected to the TV and added to NetCommand Setup, 
an icon for this device will appear in the audio section.  
Press AUDIO  to change navigation to the audio section.  

Then press ADJUST  ,  ,   or   to select the TV 

speakers icon or the A/V Receiver icon.  Press ENT(er) to 
change the audio selection.  Press DEVICE to return the 
navigation to the Device Section.

Device Section

When the Device Section menu is displayed, the Device or 
Input you are currently viewing shows a gold-colored icon.  

To select another device or input, press ADJUST  ,  ,   

or    on the TV’s remote to move the highlight among the 
devices.  Press ENT(er) to select the device you would 

like to view and hear.  The TV inputs are automatically 

changed.  If NetCommand is set up, the inputs on 
compatible A/V Receivers are automatically changed at 
the same time.

Power On/Off Devices

    

 

 

Some devices will power On automatically when you 
select to use the device.  These devices will power Off 
automatically when you turn Off the TV.  For devices that 
do not power On or Off automatically display the Device 
Selection menu, ADJUST   or    to highlight the device 
icon and press POWER on the remote control.  For the 

A/V Receiver, press AUDIO to move the navigation to the 
Audio Section.  Highlight the A/V Receiver icon and press 

POWER.  If you press POWER on the remote control when 
the Device Selection menu is not displayed, the TV will 
turn Off.

When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 1) displays.  When 
NetCommand® has not been setup, the Device Selection menu allows you to select an input for viewing.  When 
NetCommand is setup the Device Selection menu allows you to select the device for viewing, select audio from the TV 
speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals.  

Connection Section

The Connection Section shows the other devices that 

are currently connected to the device highlighted in the 
Device Section.  

For example, if the Digital VHS (D-VHS) is currently 
recording from Ant-DTV, when you move the highlight 
to the Ant-DTV icon, the D-VHS icon will appear in the 
Connection Section.  This icon will disappear when you 
move the highlight to another icon.  

Video Section 

The TV icon shows the destination for the device 

highlighted in the Device Section.

Only devices that were designed by their manufacturers to respond to separate On and Off 

remote control signals will be able to turn On automatically.  Not all manufacturers provide this 
ability for their products.

Main Picture