Siemens CX75 Mode D'Emploi
©
Sieme
ns
AG
2003, C:\Daten
_itl
\Sie
m
ens\DTP
-Satz\Pro
dukte\CX75_
Pho
enix
_1\out-
Setup
48
VAR Langua
ge: en; V
A
R issue
date: 050429
left page (48)
of CX75 SUG en, A31008-H7420-A1-2-7619 (11.05.2005, 08:38)
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
in the "FAQ" section.
Authentication
Activate or deactivate encrypted di-
al-up (CSD connections only) for In-
ternet access.
Fax/data
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
Rec. voice/fax
b
Start the required communication
program on your PC and activate the
function on the phone during the call
(the PC will take over the connection).
Rec. fax/data
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data) is
displayed in the phone display. Now
start the communication program on
your PC to receive the fax/data.
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used ac-
cidentally. However, you can still be
called and you can still make an
emergency call.
Direct call
Only one phone number can be di-
alled. You set and enter the required
phone code (4 to 8-digits) when the
first security setting is made.
#
To switch off, press and
hold
, then enter the
phone code.
Only
‚
b
Restrict calls to SIM-protected num-
bers in the Phonebook.
PIN codes
For description, see page 15:
PIN control
,
Change PIN
,
Change PIN2
,
Chg.phonecode
Additional information
Block/unblock in standby mode. In each case:
Block/unblock in standby mode. In each case:
#
Press and hold.