Roland juno-stage Mode D'Emploi
50
Chapter 2. Selecting Sounds
Selecting Performances by Number
([NUMERIC])
When the cursor is located at the performance number, you can select
a performance by pressing [NUMERIC], using [0]–[9] to specify the
desired performance number, and pressing [ENTER].
a performance by pressing [NUMERIC], using [0]–[9] to specify the
desired performance number, and pressing [ENTER].
If you press [NUMERIC] instead of pressing [ENTER], you’ll return to
the previous screen without the performance number being changed.
the previous screen without the performance number being changed.
Registering and Selecting Frequently Used
Performances (FAVORITE)
You can register your frequently used performances in “Favorite” so
that they can be selected instantly when desired.
that they can be selected instantly when desired.
Using a Pedal to Select Performances
(PATCH SELECT Pedal)
You can switch performances by using a pedal switch (sold
separately) connected to the PATCH SELECT jack.
separately) connected to the PATCH SELECT jack.
You can use a stereo cable to connect two pedal switches to the
PATCH SELECT jack. (Refer to the connection diagram on p. 21)
PATCH SELECT jack. (Refer to the connection diagram on p. 21)
In Performance mode, each time you press a pedal connected to the
PATCH SELECT jack, the performance number will increment or
decrement accordingly.
PATCH SELECT jack, the performance number will increment or
decrement accordingly.
If you’ve connected only one pedal, pressing the pedal will increment
the Performance number.
the Performance number.
This pedal will function according to the system setting “Patch
Select.” For details, refer to the system setting “Patch Select” (p.
147).
Select.” For details, refer to the system setting “Patch Select” (p.
147).
The currently selected part is called the “current part.”
1.
Press [PERFORM] or [PART SELECT] so it’s lit.
The PERFORM PLAY screen or PART SELECT screen will appear.
If you’re in the PERFORM PLAY screen
2.
Use [
] [
] to select a part.
If you’re in the PART SELECT screen
2.
Use the cursor buttons to move the cursor to the part number.
3.
Use the VALUE dial or [DEC] [INC] to select a part.
If Split or Dual are on (i.e., if [SPLIT] or [DUAL] is lit), only the
Upper or the Lower part can be selected.
Upper or the Lower part can be selected.
Here’s how to select the patch that is assigned to a part.
1.
Select a part in the PART SELECT screen.
2.
Use the cursor buttons to move the cursor to the patch group or
part number.
part number.
3.
Use the VALUE dial or [DEC] [INC] to select the desired patch.
Selecting a Part
Selecting a Patch for Each Part
Part Number
Part Number
JUNO-STAGE_e.book 50 ページ ２００８年１０月１７日 金曜日 午後１２時２７分