Motorola L403C Mode D'Emploi
Getting started
9
BATTERY LOW WARNING
If the flashes in the display, you will need to recharge
the cordless handset before you can use it again.
During charging, the will scroll in the display.
BATTERY PERFORMANCE
If the flashes in the display, you will need to recharge
the cordless handset before you can use it again.
During charging, the will scroll in the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery pack should
give up to 12 hours talk time and up to 180 hours
standby time on a single charge.
Note that new battery packs do not reach full capacity
until they have been in normal use for several days.
To keep your battery packs in the best condition, leave
the cordless handset off the charger for a few hours at
a time.
Running the battery packs right down at least once a
week will help them last as long as possible.
The charge capacity of rechargeable battery packs will
reduce with time as they wear out, giving the cordless
handset less talk/standby time. Eventually they will
need to be replaced.
After charging your cordless handset for the first time,
subsequent charging time is about 6-8 hours a day. The
battery pack and cordless handset may become warm
during charging. This is normal.
give up to 12 hours talk time and up to 180 hours
standby time on a single charge.
Note that new battery packs do not reach full capacity
until they have been in normal use for several days.
To keep your battery packs in the best condition, leave
the cordless handset off the charger for a few hours at
a time.
Running the battery packs right down at least once a
week will help them last as long as possible.
The charge capacity of rechargeable battery packs will
reduce with time as they wear out, giving the cordless
handset less talk/standby time. Eventually they will
need to be replaced.
After charging your cordless handset for the first time,
subsequent charging time is about 6-8 hours a day. The
battery pack and cordless handset may become warm
during charging. This is normal.
Connecting the corded base
1. Connect the corded handset to the corded base
with the provided coiled line cord.
2. Plug the power adapter with smaller pin plug &
telephone line cord into the corded base.
3. Plug the other end of the power adapter &
telephone line cord into the wall jack.
4. Always use the telephone line cord provided in the
box.
5. Use only the provided adapter.