Senseo HD7814/60 Manuel D’Utilisation

Page de 4
English
introduction
With SENSEO
®
, you can enjoy a perfect cup of coffee 
with a delicious crema layer whenever you feel like it. 
Each cup is freshly brewed, so you’re always sure of a 
pure and round taste. SENSEO
®
 combines a unique 
brewing method from Philips with convenient coffee 
pods from Douwe Egberts, available in different blends 
of fine roast and ground coffee. Together they make sure 
you only get the very best in flavour and aroma from the 
coffee. 
The Douwe Egberts coffee in convenient SENSEO
®
 
coffee pods and Philips’ unique new SENSEO
®
 
brewing system are perfectly matched to ensure that the 
best taste and aroma are extracted from the coffee. 
To optimise the taste of the coffee, keep the following 
aspects in mind:
Fresh water
Use fresh water every day. If you have not used the coffee 
machine for three days, you have to flush it with fresh 
water before you use it again (see section ‘Flushing’ in 
chapter ‘Cleaning’).
Fresh coffee pods
Use the SENSEO
®
 coffee pods that have been specially 
developed by Douwe Egberts for your SENSEO
®
 coffee 
machine for a full, round taste. Douwe Egberts SENSEO
®
 
coffee pods stay fresh longer if you close the package 
with the keep-fresh seal after use or if you store them in 
a storage container. 
A clean machine
Clean and descale the Philips SENSEO
®
 coffee machine 
regularly (see chapters ‘Cleaning’ and ‘Descaling’). Remove 
used coffee pods after brewing. If a used pod has been 
left in the coffee machine and you have not used the 
machine for some time, flush the machine before you use 
it again (see section ‘Flushing’ in chapter ‘Cleaning’).
This machine is intended for household use only and not 
for professional use.
general description (Fig. 1)
A
  Water reservoir
B
  Lid of water reservoir
C
  1-cup pod holder °
D
  2-cup pod holder °°
E
  Coffee spout
F
  Cover of coffee spout
G
  Drip tray
H
  Cup tray
I
  Water distribution disc
J
  Sealing ring
K
  Outflow valve
L
  Indicator light
important
Read this user manual carefully before you use the 
machine and save it for future reference. 
Danger
Never immerse the machine in water or any other 
liquid.
Warning
Check if the voltage indicated on the bottom of 
the machine corresponds to the local mains voltage 
before you connect the machine.
This machine is not intended for use by persons 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the machine by a 
person responsible for their safety.
Children should be supervised to ensure that they 
do not play with the machine.
Do not use the machine if the plug, the mains cord 
or the machine itself is damaged. 
If the mains cord is damaged, you must have it 
replaced by Philips, a service centre authorised by 
Philips or similarly qualified persons in order to avoid 
a hazard.
Caution
Always return the machine to a service centre 
authorised by Philips for examination or repair. 
Do not attempt to repair the machine yourself, 
otherwise your guarantee becomes invalid.
-
-
-
-
-
-
-
Never put normal ground coffee or use torn pods in 
the SENSEO
®
 machine, as this causes it to become 
blocked.
Do not use the machine in combination with a 
transformer, as this could cause hazardous situations. 
Always put the machine on a flat and stable surface.
Never let the machine operate unattended.
Do not use the machine at altitudes higher than 
2200 metres above sea level.
The machine does not work at temperatures below 
10°C. 
Flush the coffee machine with fresh water before you 
use it for the first time (see chapter ‘Preparing the 
machine for use’). This causes the boiler to fill with 
water, which is essential for the machine to work 
properly.
Do not use the SENSEO
®
 machine in combination 
with water softeners based on sodium exchange. 
Philips strongly advises you to descale this SENSEO
®
 
machine every 3 months. If the machine is not 
descaled in time and according to the procedure 
described in chapter ‘Descaling’, this may lead to 
technical failures.
Never interrupt the descaling process.
Never use a descaling agent based on mineral acids 
such as sulphuric acid, hydrochloric acid, sulphamic 
acid and acetic acid (e.g. vinegar). These descaling 
agents may damage your SENSEO
®
 coffee machine.
Never turn your SENSEO
®
 machine on its side. 
Always keep it in upright position, also during 
transport.
Electromagnetic fields (EMF)
This machine complies with all standards regarding 
electromagnetic fields (EMF). If handled properly 
and according to the instructions in this user manual, 
the machine is safe to use based on scientific evidence 
available today.
Preparing the machine for use
You cannot brew coffee if you have not flushed the 
SENSEO
®
 coffee machine first! 
The flushing cycle causes the boiler to fill with water. 
After this, the coffee machine is ready for use. 
Flush the machine in the following way:
 1
 Remove the water reservoir (Fig. 2).
 2
 Fill the water reservoir with cold water up to 
the
MAX
 indication and put it back onto the 
machine.  (Fig. 3)
 3
 Move the lever upwards to release the lid (Fig. 4).
 4
 Open the lid (Fig. 5).
 5
 Put the 1-cup pod holder ° or the 2-cup pod 
holder °°in the machine without pod(s).  (Fig. 6)
 6
 Close the lid and lock the lever (Fig. 7).
Note: Make sure you lock the lever properly. Push it down 
until it snaps home with a click. 
Note: Never flush the machine with the lid open. The lid 
must be properly locked.
 7
 Put the plug in an earthed wall socket. 
 8
 Put a bowl (with a capacity of at least 1500ml) 
under the coffee spout to collect the water.  (Fig. 8)
 9
 Press the on/off button I and subsequently press 
the 1-cup  button ° and the 2-cup button  °°
briefly at the same time.  (Fig. 9)
The boiler fills itself with water from the water 
reservoir. This takes some time (approx. 90 to 150 
seconds). The machine switches off automatically 
when the flushing cycle ends. During the flushing 
cycle, the machine produces more noise than 
during a regular brewing cycle.
Note: Before you use the machine for the first time, clean 
the coffee spout and the pod holders with hot water and 
some washing-up liquid or in the dishwasher. Clean the 
water reservoir thoroughly in hot water, if necessary with 
some washing-up liquid.
Now your Philips SENSEO
®
 coffee machine is ready for 
use. 
-
-
-
-
-
-
-
-
-
-
-
-
,
Brewing coffee
 1
 Fill the water reservoir with cold water up to 
the
MAX 
indication and put it back onto the 
machine.  (Fig. 3)
Never pour milk, coffee, hot water or carbonated water 
into the water reservoir.
°
 MIN: minimum amount of water required to 
brew 1 cup of SENSEO
®
 coffee. 
°°
 MIN: minimum amount of water required to 
brew 2 cups of SENSEO
®
 coffee. 
A full reservoir allows you to make SENSEO
®
 coffee 
a number of times (up to 5 cups). This makes it 
unnecessary to fill the water reservoir each time you 
want to make a cup of coffee. 
 2
 Press the on/off button I.  (Fig. 10)
The indicator light flashes while the water heats up. 
Heating up takes approx. 90 seconds.
The coffee machine is ready for use when the 
indicator light lights up continuously.
 3
 Move the lever upwards to release the lid (Fig. 11).
 4
 Open the lid.
 5
 Place the appropriate pod holder in the machine. 
Note: Make sure the pod holder is clean and the sieve in the 
centre is not clogged, e.g. with loose coffee grounds. 
If you want to make one cup of SENSEO
®
 coffee, 
use 1 coffee pod in combination with the 1-cup pod 
holder ° and the 1-cup button °.  (Fig. 12)
If you want to make two cups of SENSEO
®
 coffee, 
use 2 coffee pods in combination with the deeper 
2-cup pod holder °° and the 2-cup button  
°°
.  (Fig. 13)
 6
 Place the SENSEO
®
 coffee pod(s) properly in the 
centre of the pod holder, with the convex side 
pointing downwards. 
Note: Use SENSEO
®
 coffee pods from Douwe Egberts 
specially designed for your SENSEO
®
 coffee machine for a 
full and round taste.
Place 1 SENSEO
®
 coffee pod in the 1-cup pod 
holder °.  (Fig. 14)
Place 2 SENSEO
®
 coffee pods in the 2-cup pod 
holder °°.  (Fig. 15)
Note: Make sure the coffee in the pod(s) is evenly distributed 
and press the pod(s) lightly into the pod holder.
Note: Never put normal ground coffee or use torn pods in 
the SENSEO
®
 machine, as this causes it to become blocked.
 7
 Close the lid and lock the lever (Fig. 7).
Always make sure the lid is properly locked. Push the 
lever down until it snaps home with a click. 
Never start brewing with the lid open. The lid must be 
properly closed.
 8
 Place one cup or two cups under the spout 
openings (Fig. 16).
The cups you use should have a capacity of at least 
150ml. Do not use cups that are too large, as they cause 
the coffee to get cold more quickly.
 9
 Press the button that indicates the number of cups 
of SENSEO
®
 coffee you want to brew.  (Fig. 17)
°
 for one cup 
°°
 for two cups 
The SENSEO
®
 coffee machine starts brewing. 
The machine automatically supplies the optimal 
amount of water.
You can interrupt the brewing process at any time 
by pressing the on/off button I. If you switch the 
machine back on after you have interrupted the 
brewing process, the machine does not complete the 
interrupted brewing cycle. 
Do not remove the water reservoir during a brewing 
cycle, as this causes the machine to draw in air. When 
this happens, the next cup will only be partly filled.
Note: If you only get a small quantity of coffee or no coffee 
at all out of the machine, you have not flushed the machine 
properly before first use. As a result, the boiler is not or not 
completely filled. Flush the machine properly (see chapter 
‘Preparing the machine for use’) before you brew another 
cup of coffee. 
-
-
-
,
,
,
,
,
-
-
,
-
-
4222.200.0046.4
2/4