Enterasys sehi100tx-22 Manuel D’Utilisation

This chapter outlines the procedure for attaching the SEHI to the network 
as a stackable or standalone device. Ensure that the network meets the 
guidelines and requirements outlined in Chapter 3, Installation 
Requirements and Specifications, before installing the SEHI.

Unpack the SEHI as follows:

1. Remove the shipping material covering the SEHI in the shipping box.

2. Carefully remove the SEHI from the shipping box and set it aside to 

prevent damage.

3. Visually inspect the SEHI. If there are any signs of damage, contact 

Cabletron Systems Technical Support immediately. Refer to 
Section 1.3 for instructions on getting help.

4. Read the SEHI Release Notes included in the shipping box.

A single phase grounded power receptacle that meets the 
requirements listed in Chapter 3 must be located within seven 
feet of the installation.

Failure to follow installation instructions may result in an 
electrical shock hazard.

Cabletron Systems includes a 3 1/2-inch disk with the
SEHI100TX-22 that contains a backup copy of the FLASH 
Firmware Image File. Download the file to the SEHI100TX-22 if 
the existing image becomes corrupted. Refer to Appendix B for 
detailed download instructions.