Enterasys 2e42-27 Manuel D’Utilisation

Chapter 5: Local Management

NETWORK# (Read-only)

Indicates the network on the connector selected in the CONNECTOR 
field. 

 shows the association between the CONN and Network 

Ports on the device.

LINK STAT. (Read-only)

Displays the Link status (Link or No Link) of the port.

CURRENT OPER. (Read-only)

Displays the current operating mode of the port.

MODE DESIRED OPER. (Selectable)

This field steps through the following operating mode options: Auto-Neg 
(Auto Negotiation), 10Base-T, and 100Base-TX.

When Auto-Neg. is selected, the port Auto-Negotiates with the device 
to which it is attached to determine its Operating Mode (10 Mbps or 
100 Mbps). 

When 10Base-T is selected, the port is forced to operate in standard 
Ethernet mode (10 Mbps) only.

When 100Base-TX is selected, the port is forced to operate in Fast 
Ethernet mode (100 Mbps) only. 

To set the port operating mode, refer to 

.

CONN 1 = Network Port 1, 10 Mbps

 Network Port 2, 100 Mbps

CONN 1 = Network Port 1, 10 Mbps

 Network Port 2, 100 Mbps

CONN 2 = Network Port 3, 10 Mbps

 Network Port 4, 100 Mbps

CONN 2 = Network Port 3, 10 Mbps

 Network Port 4, 100 Mbps

CONN 3 = Network Port 5, 10 Mbps

 Network Port 6, 100 Mbps

CONN 3 = Network Port 5, 10 Mbps

 Network Port 6, 100 Mbps

CONN 3 = Network Port 7, 10 Mbps

 Network Port 8, 100 Mbps

HSIM = Port 7