Output Solutions c-680 lablejet Mode D'Emploi
Power switch [1]
The printer can be switched on and off with the power switch. After pushing
the button it will take a couple seconds until the printer is ready. The power-
LED starts flashing when the computer processes data.
The printer can be switched on and off with the power switch. After pushing
the button it will take a couple seconds until the printer is ready. The power-
LED starts flashing when the computer processes data.
Caution!:
Always turn on/off the printer using the power switch. Using the switch of
the connection plug board, surge protector or ta power outlet can cause
damages to the printer and/or the ink cartridge will run dry.
the connection plug board, surge protector or ta power outlet can cause
damages to the printer and/or the ink cartridge will run dry.
Paper tear off sensor [2]
After the sensor detects that a label is printed, the printer will wait to print
the next label until the label is removed. This function is only active if
selected in the printer driver.
Tear-off edge [3]
Tear off the label by pulling it up against the tear-off edge.
After the sensor detects that a label is printed, the printer will wait to print
the next label until the label is removed. This function is only active if
selected in the printer driver.
Tear-off edge [3]
Tear off the label by pulling it up against the tear-off edge.
Warning:
The tear-off edge could cause injuries.
Button (no function) [4]
On this printer this button has no function.
Resume button and –LED [5]
The Resume-LED flashes, if e.g. the paper tray is empty or a paper jam
has to be cleared. When the problem is solved press the resume button to
continue printing.
Print cartridge status symbol and –LED [6]
The print cartridge status-LED
is on or flashes if the cartridge must be
tested or replaced. In the driver tab TOOLBOX you can display the actual
ink level of the cartridges.
ink level of the cartridges.
9