Output Solutions ez-2000plus Mode D'Emploi
2. Printer Installation
This printer model has the following print modes:
Thermal Transfer
(TT)
Thermal Transfer
(TT)
When printing, ribbon must be installed to transfer the print contents onto the
media.
media.
Direct Thermal
(DT)
(DT)
When printing, no ribbon is necessary; it only requires direct thermal media.
Please check the specific print mode, and then go into the Setting Mode after power on the
printer。
printer。
2-1. Label Installation
1.
Place the printer on a
horizontal surface, and
open the top cover.
horizontal surface, and
open the top cover.
2. Follow
the
sequence
and
direction as the
figure shows, pull the
Print Head Lever out
and flip it upward to the
right.
Print Head Lever out
and flip it upward to the
right.
2
1
3.
Pull the Label
Alignment Guide to the
direction as the blue
arrow 1 indicates.
Alignment Guide to the
direction as the blue
arrow 1 indicates.
4.
Flip the Label Supply
Guide upward as the
blue arrow 2 indicates.
Guide upward as the
blue arrow 2 indicates.
2
1
EZ-2000+/6000+ User’s Manual Rev. D
19