Output Solutions ez-2000plus Mode D'Emploi
3-2. Rewind Bracket Installation for EZ-2000 Plus
1.
Face the printer front, and
unscrew the bottom cover
screw.
unscrew the bottom cover
screw.
2.
Remove the bottom front
Cover.
Cover.
【
Note
】
Before the installation,
please power off the printer
first.
please power off the printer
first.
3.
Mount the label rewind
bracket onto the printer
mechanism and secure
the screws into place.
bracket onto the printer
mechanism and secure
the screws into place.
4. Label
rewind
bracket
installation completes.
5.
Install the media into the
printer.
printer.
6.
Feed the label through
the Printer Mechanism
and around the Label
Feed Guide.
the Printer Mechanism
and around the Label
Feed Guide.
7.
Wrap the label around the
Liner Rewinder Shaft,
and use the U Shape Clip
to secure the liner.
Liner Rewinder Shaft,
and use the U Shape Clip
to secure the liner.
【
Note
】
Make sure the label rewind is in
correct direction.
correct direction.
EZ-2000+/6000+ User’s Manual Rev. D
28