TomTom 3 Mode D'Emploi

 
 

 

 

6/70 

For mobile installation, ensure that the GPS receiver has an unobstructed view of the sky, 
or that it is connected to an optional external antenna  Protect your product from 
excessive heat (see previous paragraph), extreme cold (see previous paragraph), dust, 
liquids and direct sunlight. Do not use in a humid environment. Do not use the product on 
an unstable surface.  When using the product in a mobile environment always fasten the 
product to prevent accidental movement of it. Handle all parts, cables and connectors 
with care. Only use supplied and suggested accessories and power supplies. Ensure that 
any power supply and/or AC adapter is cooled by placing it in a ventilated area. The 
power supply and/or AC adapter, the cradle, and the receiver unit may become warm or 
hot during operation. Unplug the product from any external power source before 
cleaning.  Only clean the product with a dry cloth. Only use the supplied PDA Power 
Cable with PDA’s that conform to the specifications of the cable. Follow the instructions 
in this manual carefully. 

Great care was taken in preparing this manual. Constant product development may mean 
that some information is not entirely up-to-date. 
The information in this document is subject to change without notice. No liability shall be 
assumed for technical or editorial errors or omissions contained herein; nor for incidental 
or consequential damages resulting from the performance or use of this material. This 
document contains information protected by copyright. 
 

 
The TomTom Wireless GPS receiver set comes with: 

 

 

(1) Receiver unit 
(2) Cradle (not included)