TomTom rider Mode D'Emploi

5

A

Microphone

B

On/Off button

C

Speaker

D

LED

E

Volume down

F

Volume up

G

Charging connector

Before you can use your Bluetooth headset, fully charge the headset using the  

charger supplied with the headset.

Fully charging the headset takes between 2 and 3 hours. When charging, the 

LED is a steady red. When charging is finished, the LED turns off.

When the batteries are running low, an alert tone is played.

To turn the headset on, press and hold the on/off button for 6 seconds, until 

the LED flashes blue 3 times. An ascending alert tone is played. When the 

headset is on, the LED flashes blue every 3 seconds.

To turn the headset off, press and hold the on/off button for 3 seconds, until 

the LED flashes red 3 times. A descending alert tone is played.

If you did not establish a Bluetooth connection between your Bluetooth 

headset module and your TomTom RIDER when you first turned your RIDER 

on, you can establish the connection at any time. 

From the Main Menu, tap Change Preferences. Tap Connect to headset and 

follow the instructions to establish the connection.

Attach your headset to your helmet as shown in the Installation Poster. Make 

sure you position the microphone correctly. For best results, don’t position the 

microphone directly in front of your mouth, position it just to the side of your 

mouth. 

A

B

C

E

D

F

G