Smeg sto905u Mode D'Emploi

Page de 91
Rev 0.0
USER INSTRUCTIONS
EN
PROGRAM NUMBER 
AND SYMBOL
DISHES AND 
CUTLERY
PROGRAM 
SEQUENCE
TIME
CONSUMPTION
MINUTES 
(2)
WATER
(1)
ENERGY
KWh (2)
6
DISH 
WARMING
Clean mixed 
dishes to 
rinse and heat 
before use
Hot rinse at 69°C 
(156.2°F).
Dry.
50’
3.4 l
0.89 gal.
0.63
7
CRYSTAL
Slightly dirty 
crystal, 
porcelain and 
mixed dishes
Wash at 45°C 
(113°F).
Cold rinse.
Hot rinse at 69°C 
(156.2°F).
Dry.
68’
9.4 l
2.48 gal.
0.61
8
NORMAL
Normally dirty 
mixed dishes
Cold pre-wash.
Extended wash at 
55°C (131°F).
Cold rinse.
Hot rinse at 68°C 
(154.4°F).
Extended dry.
112’
13.3 l
3.51 gal.
0.79
9
AUTO SUPER
WASH
ETL SANITATION 
LISTED
Very dirty 
mixed dishes
Cold pre-wash 
(depending of the 
type of dirty).
Wash at 65°C 
(149°F).
Cold rinse.
Hot rinse at 70°C 
(158°F).
Dry.
115’
÷130’
9
÷13
 l
2.38
÷3.43
 
gal.
0.9
÷1.1
10
EXTREME
WASH
ETL SANITATION 
LISTED
Very dirty 
mixed dishes 
and pans
Pre-wash at 45°C 
(113°F).
Wash at 70°C 
(158°F).
2 cold rinses.
Hot rinse at 70°C 
(158°F).
Dry.
122’
16.2 l
4.28 gal.
1.09
Tab. 2-02b
(1) Average water consumption with the softener set to level 0 (zero).
Any other setting will increase water consumption till 2.5 l (0.66 gal.)/cycles with setting 5. 
(2) The cycle times listed in the use and care manual are based on normal soil loads and 120°F 
(49°C) incoming water and will vary based on your actual conditions.
- Only “AUTO SUPER WASH” and “EXTREME WASH” programmes conforms to NSF std 184 and 
are certifi ed by INTERTEK with the ETL SANITATION LISTED.
- When the “AUTO PROGRAMMES” are selected, the dishwasher recognizes the type of dirt and 
automatically adjusts the washing parameters as appropriate.
When the “Sani light” (sanitation light) appears on the display, it means that the dishwasher and its 
contents have been sanitised according to the requirements of the National Sanitation Foundation 
(NSF).