Nokia N93 Mode D'Emploi

Copyright © 2006 Nokia. All rights reserved. 

Scroll to the setting you want to change, and press 

 to 

open the choices. Tones stored on the memory card are 
indicated with 

. You can scroll through the tone list 

and listen to each one before you make your selection. To 
stop the sound, press any key.

When you choose a tone, 

 opens a list of 

bookmarks. You can select a bookmark and start 
connection to a Web page to download tones.

If you want the caller’s name to be said when your device 
rings, select 

> 

, and set 

 to 

. The caller’s name must be saved in 

.

To create a new profile, select 

> 

.

The 

 profile lets you use the device without 

connecting to the wireless network. When you activate 
the 

 profile, the connection to the wireless 

network is turned off, as indicated by 

 in the signal 

strength indicator area. All wireless phone signals to and 
from the device are prevented. If you try to send 
messages, they are placed in the outbox to be sent later.

 Warning: In the offline profile you cannot make (or 

receive) any calls, except make calls to certain 
emergency numbers, or use other features that require 
network coverage. To make calls, you must first 

activate the phone function by changing profiles. If the 
device has been locked, enter the lock code.

 Warning: Your device must be switched on to use 

 profile. Do not switch the device on when 

wireless device use is prohibited or when it may cause 
interference or danger.

When you have activated the 

 profile, you can still 

use the wireless LAN (if available), for example, to read 
your e-mail or browse on the Internet. Remember to 
comply with any applicable safety requirements when 
establishing and using a wireless LAN connection. See 
‘Wireless LAN’, p. 15.

To exit the 

 profile, press the power key, and select 

another profile. The device reenables wireless 
transmissions (providing there is sufficient signal 
strength). If a Bluetooth connection is activated before 
using the 

 profile, it is deactivated. A Bluetooth 

connection is automatically reactivated after you exit the 

 profile. See ‘Settings’, p. 81.

To change the look of the display, such as the wallpaper 
and icons, press 

, and select 

> 

. The active 

theme is indicated by 

. In 

 you can group