Lenovo m58 9960 Manuel Du Matériel Informatique
9.
Make sure that the small handle is in the raised position and the
microprocessor retainer is fully open.
microprocessor retainer is fully open.
10.
Remove the protective cover 2 that protects the gold contacts on the new
microprocessor 1.
microprocessor 1.
11.
Hold the new microprocessor and align the notches on it with the tabs in the
microprocessor socket, or align the small triangle on one corner with the
corresponding beveled corner of the microprocessor socket.
microprocessor socket, or align the small triangle on one corner with the
corresponding beveled corner of the microprocessor socket.
12.
Lower the new microprocessor straight down into the microprocessor socket
on the system board.
on the system board.
13.
Close the microprocessor retainer and lock it into position with the small
handle to secure the new microprocessor in the socket.
handle to secure the new microprocessor in the socket.
14.
Reinstall the heat sink and fan assembly. See “Replacing the heat sink and fan
assembly” on page 94.
assembly” on page 94.
15.
Reconnect the heat sink and fan assembly cable to the microprocessor fan
connector on the system board.
connector on the system board.
16.
Reinstall any other parts or reconnect any other cables you removed.
17.
Figure 12. Removing the microprocessor
98
Hardware Maintenance Manual