Pro-Team coachvac Mode D'Emploi
– ProTeam Owner’s Manual
EN
G
LI
SH
Canister Vacuums
OVERVIEW
• Vacuum (1)
• Powercord (2)
• Hose (3)
• Accessories (4)
• Intercept Micro Filter (5)
• Micro Cloth Filter (6)
• Dome Filter (7)
• Exhaust Filter (8)
• Powercord (2)
• Hose (3)
• Accessories (4)
• Intercept Micro Filter (5)
• Micro Cloth Filter (6)
• Dome Filter (7)
• Exhaust Filter (8)
QUICK START
1. Tip the vacuum upright and remove the top cap (Figure A).
2. Remove filters (Figure B).
3. Check to make sure the filters have not shifted during shipping (Figure C).
3. Replace the filters and cap (Figure D).
4. Push the long cuff on the end of the hose completely into the cap opening (Figure E).
NOTE: To easily remove the hose, twist off the top cap and pull off the Intercept Micro Filter. Set the
cap on any flat surface so that the center of the cap rests on the top lip of the vacuum canister and
push down on the cap (Figure F). The hose can then easily be pulled out of the cap.
cap on any flat surface so that the center of the cap rests on the top lip of the vacuum canister and
push down on the cap (Figure F). The hose can then easily be pulled out of the cap.
Figure A
Figure F
Figure B
Figure D
Figure E
Figure C
(1)
(2)
(3)
(5)
(6)
(7)
(8)
(4)