Pantech crossover Guide De Spécification
65
Connectivity
This chapter introduces useful tips on how to connect to the
network available that enables applications of Crossover to
run.
network available that enables applications of Crossover to
run.
Using a Wi-Fi network
Connecting to a Wi-Fi network
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap
Wi-Fi to activate the technology.
4. Select and tap a network. You should enter the password
if the network is secured.
indicates a secured Wi-Fi
network.
5. Tap
Connect. Once the network is remembered, Crossover
will automatically connect to it when in range.
Activating Wi-Fi
Connecting to a Wi-Fi
network
Note The icon next to each network indicates the strength of the
signal. For example,
indicates the signal is poor while
indicates
the signal is strong.
About network notifications
You are informed by default when a Wi-Fi network is available
around you. The message
around you. The message
in the status bar indicates a
network is available. Tap
Network notification in the Wi-Fi
settings if you do not want to be informed the availability of the
network.
network.
Setting Wi-Fi networks
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap
Wi-Fi to activate the technology.
4. Tap
Automatic connection if you want Crossover to
connect to AT&T Wi-Fi network automatically.
5. Tap
WPS button connection if you want to establish a
new wireless connection using the Wi-Fi Protected Setup
(WPS). You should press WPS button on your Wi-Fi access
point within two minutes.
(WPS). You should press WPS button on your Wi-Fi access
point within two minutes.
Using the Easy Setting
1. Tap on the top of the home screen and drag it down, or
press
n in idle mode and tap Notifications.
2.
Tap in Easy Setting. The icon turns orange when the
function is on.
function is on.
Searching for Wi-Fi networks
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap
Wi-Fi to activate the technology. Crossover scans
networks automatically every six seconds. The newly found
networks appear on the bottom of the list.
networks appear on the bottom of the list.