Sony DAR-RD100 Mode D'Emploi
40
1
Insert a disc.
2
Set the AMP/DVD switch to DVD, and press
SET UP to turn on the Setup Display.
SET UP to turn on the Setup Display.
3
Select
[Disc Info] and press ,.
4
Select [Finalize] and press ,.
5
Select [Finalize] and press ENTER.
The display asks for confirmation.
6
Select [OK] and press ENTER.
The recorder starts finalizing the disc.
Approximate remaining time for finalizing
appears on the screen. Some discs may require
more time than is indicated.
Approximate remaining time for finalizing
appears on the screen. Some discs may require
more time than is indicated.
7
Press ENTER when [OK] appears.
To unfinalize a DVD-RW
If you cannot record or edit on a DVD-RW that
has been finalized (a message appears), unfinalize
the disc by selecting [Unfinalize] in step 5 above.
has been finalized (a message appears), unfinalize
the disc by selecting [Unfinalize] in step 5 above.
z
Hint
You can check whether the disc has been finalized or not.
If you cannot select [Finalize] in step 5 above, the disc
has already been finalized.
If you cannot select [Finalize] in step 5 above, the disc
has already been finalized.
Notes
• The time required for finalizing depends on the disc
type, recording time, or the number of titles recorded
on the disc.
on the disc.
• Depending on the condition of the disc, recording, or
the DVD equipment, discs may not play even if the
discs are finalized.
discs are finalized.
• The recorder may not be able to finalize the disc if it
was recorded on another recorder.
• If the recording time is short, the disc may not be
playable on some DVD players.
1
2
3
4
6
7
8
9
0
5
</M/m/,,
ENTER
ENTER
SET UP
AMP/DVD
switch
switch
Format DVD
Disc Info
Finalize
Disc Name
Protect
Finalize