Sony ht-ddw1500 Mode D'Emploi

Page de 164
50
GB
C:\Documents and 
Settings\pc13\Desktop\JC060815_2662266612DDW1500_GBES\2662266612\01GB05AMP_HT-
DDW1500-AR.fm
masterpage: Left
HT-DDW1500
2-662-266-61 (2)
Tip
The receiver lets you to input the speaker position in 
terms of distance. However, it is not possible to set 
the center speaker further than the front speakers. 
Also, the center speaker cannot be set more than 
 
1.5 meter closer from the front speakers.
Likewise, the surround speakers can not be set 
further away from the listening position than the 
front speakers. And they can be no more than
 
 4.5 meter closer. This is because incorrect speaker 
placement is not conducive to the enjoyment of 
surround sound.
Please note that, setting the speaker distance closer 
than the actual location of the speakers will cause a 
delay in the output of the sound from that speaker. In 
other words, the speaker will sound like it is further 
away.
For example, setting the center speaker distance 
 
1-2 meter closer than the actual speaker position will 
create a fairly realistic sensation of being “inside” 
the screen. If you cannot obtain a satisfactory 
surround effect because the surround speakers are 
too close, setting the surround speaker distance 
closer (shorter) than the actual distance will create a 
larger sound stage.
Adjusting these parameter while listening to the 
sound often results in much better surround sound. 
Give it a try!
SW PHASE (Sub woofer phase 
polarity)
Lets you set the sub woofer phase polarity.
• NORMAL
Normally, select “NORMAL”.
• REVERSE
Depending on the type of front speakers, the 
position of the sub woofer, and the cut-off 
frequency of the sub woofer, setting the 
phase polarity to “REVERSE” may produce 
better bass. Besides bass reproduction, the 
richness and tightness of the overall sound 
may also be affected. While listening from 
the main listening position, select the setting 
that best suits your environment.
SUR POS.
 
(Surround speaker position)
Lets you specify the location of your surround 
speakers for proper implementation of the 
surround effects in the Cinema Studio EX 
modes (page 55).
• SIDE/LO
Select if the location of your surround 
speakers corresponds to sections A and C.
• SIDE/HI
Select if the location of your surround 
speakers corresponds to sections A and D.
• BEHD/LO
Select if the location of your surround 
speakers corresponds to sections B and C.
• BEHD/HI
Select if the location of your surround 
speakers corresponds to sections B and D.
01GB01COV_HT-DDW1500-AR.book  Page 50  Tuesday, May 23, 2006  6:27 PM