US Robotics usr7908 Guide De Montage

Note: For more information, you can also refer to the Support section of the U.S.
Robotics Web site at

http://www.usr.com/support

Before You Begin

Note:

It is important that you have your serial number written down before you

install the 8-Port 10/100 Ethernet Switch. You can find your serial number on the
bottom label of the 8-Port 10/100 Ethernet Switch and on the side of the package. If
you ever need to call our Technical Support department, you will need this number
to receive assistance.

Connect the power supply

8-Port 10/100 Ethernet Switch

Quick Installation Guide

Package Contents:

Front View

Back View

Note:

You must have an Ethernet NIC installed on each computer you wish to connect

to the 8-Port Ethernet Switch.

- 8-Port 10/100 Ethernet Switch

- Quick Installation Guide

- 7.5VDC power supply

Connect your 8-Port 10/100 Ethernet Switch to
your Ethernet-ready device

Congratulations!

The installation of your U.S. Robotics 8-Port 10/100 Ethernet Switch is

complete. As connections are established with the 8-Port 10/100 Ethernet Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to seven
additional devices.

This is one of many possible configurations.

Note:

For networking information, refer to your operating system’s

documentation.

Product Number

Serial Number

7908

Port

Function

LAN Ports 1 through 8

Used to connect Ethernet devices to the LAN

7.5 V DC

For the power supply of the 8-Port 10/100 Ethernet Switch

LEDs

Color - Action

Function

PWR

Green - Lighted

Receiving power

Green - Off

Not receiving power

10/100 LINK/ACT 1-8

(Each LED corresponds with

a LAN port on the back of

the switch.)

Green - Lighted

100 Mbps LAN link is achieved

Green - Blinking

The corresponding LAN port is sending and receiving data
at 100 Mbps.

Yellow - Lighted

10 Mbps LAN link is achieved

Yellow - Blinking

The corresponding LAN port is sending and receiving data
at 10 Mbps.