U-Line ada24rglb13 Manuel D’Utilisation

Door Swing Dimensions

All units have a zero clearance for the door to open 90°. U-Line 
recommends a minimum door clearance of 2" to accommodate 
the handle if the unit is installed next to a wall or similar type of 
structure.

For a complete refreshment center, install two units side by side: 

Cut-out width for a side-by-side installation is the total of the 
widths listed under Cut-Out Dimensions in each unit’s Installation 
Guide. 

No trim kit is required. However, 1/4-inch space needs to be 
maintained between the units to ensure unobstructed door swing.

Units must operate from separate, properly grounded electrical 
receptacles placed according to each unit’s Electrical Specifications 
Requirements

The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A 
circuit (normal household current).

The units are designed to operate between 50°F (10°C) and 100°F 
(37°C). High ambient temperatures (100°F [37°C] or higher) may 
reduce the unit’s ability to reach low temperatures.

For best performance, keep the unit out of direct sunlight and away 
from heat generating equipment.

In climates where high humidity and dew points are present, 
condensation may appear on outside surfaces. This is considered 
normal. The condensation will disappear when the humidity drops.

1/4" Min.

Wall

90°

Door Swing

20-7/16"

22-3/8"

1/4" Min.

Wall

90

Door Swing

20-7/8"

25-1/2"

Wall

2" Min.

90

Door Swing

20-7/8"

25-1/4"

Wall

1/4" Min.

20-7/8"

16-1/2"

Door Swing

Wall

2" Min.

20-7/8"

16-1/2"

Door Swing

1175 & 1075 Series

(Without Handle)

(With Handle)

1115 Series

(Without Handle)

(With Handle)

29 Series

21-1/8"

25-3/16"

25-5/16"

21-1/8"

1/4" Min.

Wall

90

Door Swing

Wall

2" Min.

90

Door Swing

(Without Handle)

(With Handle)