Uniden bc60xlt-1 Mode D'Emploi
Locking a Channel While Scanning
If the scanner keeps stopping on a particular channel due
to noise or too frequent transmissions, you may want to
keep that channel from scanning.
to noise or too frequent transmissions, you may want to
keep that channel from scanning.
1.
Wait until the scanner
stops at the channel.
stops at the channel.
2.
Then press
.
3.
The scanner
immediately resumes
scanning because the
locked out channel is
no longer in the
scanning sequence.
immediately resumes
scanning because the
locked out channel is
no longer in the
scanning sequence.
Lockout Tips
To quickly lockout a series of channels, start with
the lowest number channel.
the lowest number channel.
For example, if you are locking out channels 4, 7,
8, 12, and 15, start with Channel 4. After selecting
channel 4, press
8, 12, and 15, start with Channel 4. After selecting
channel 4, press
. Then press
one or
more times to step up to the next channel to be
locked out.
locked out.
Record the locked-out channels in some
convenient place so you can restore them.
convenient place so you can restore them.
18