Utstar f1000 Manuel D’Utilisation
Menu -> Settings
4.3 Settings
Settings
From this submenu, you can perform various phone settings.
4.3.1 Scheme
Settings Scheme
After accessing this option, you can select from the following options:
4.3.1.1 Static Picture
The standby display will become static after you set this option.
After this option is selected, its current setting will be highlighted. To
customize a text and display it in standby mode, select User-defined; to
select and display a picture in standby mode, select from the options
Photograph1~Photograph24.
customize a text and display it in standby mode, select User-defined; to
select and display a picture in standby mode, select from the options
Photograph1~Photograph24.
If User-defined is selected, enter up to or 12 alphanumeric characters
(refer to “Input Method” on page 78), and then press the left soft key
(refer to “Input Method” on page 78), and then press the left soft key
(Ok) to complete the operation
If one of the options Photograph1~Photograph24 is selected, the
corresponding picture will be displayed. You can press
to browse
through other pictures. When the desired picture is displayed, press
the left soft key
the left soft key
(Ok) to complete the operation
4.3.1.2 Every Hour
The standby display will change every hour in a 24-hour cycle after you
set this option. When this option is accessed, these options will be
available:
set this option. When this option is accessed, these options will be
available:
42