Utstar gz one type v Mode D'Emploi
G’zOne Type-V
83
G’zOne Type-V
84
SETTINGS & TOOLS
5.4.5 Emergency #s
Allows you to enter 3 emergency numbers. You can call these emergency
numbers and 911, even when the phone is locked or restricted.
numbers and 911, even when the phone is locked or restricted.
1. Press
[MENU]
, 2
times, , .
2. Enter the four-digit lock code.
3. Press
Emergency #s
.
4. Select emergency number using
.
5. Enter an emergency phone number then press
.
5.4.6 Erase Contacts
To erase all of your Contacts at once:
1. Press
[MENU]
, 2
times, , .
2. Enter the four-digit lock code.
3. Press
Erase Contacts
.
Note
There is no confirmation message before all of your Contacts are
erased. As soon as Erase all is selected, they are gone!
erased. As soon as Erase all is selected, they are gone!
5.4.7 Reset Default
To reset your phone to the factory default settings:
1. Press
[MENU]
, 2
times, , .
2. Enter the four-digit lock code.
3. Press
Reset Default
.
4. Press
after reading the warning message.
5. Press
Revert
.
A confirmation message is displayed briefly before the phone resets
itself.
itself.
5.5 System Select
Allows you to set up the phone producer’s management environment.
Leave this setting as the default unless you want to alter system
selection as instructed by your service provider.
Leave this setting as the default unless you want to alter system
selection as instructed by your service provider.
1. Press
[MENU]
, 2
times, , .
2. Use
to select a setting, then press
.
Home Only / Automatic
• Home Only:
Only within your home area or home affiliated area.
• Automatic:
Scan the radio channels based on the Automatic
setting.
5.6 NAM Select
To select the phone’s NAM (Number Assignment Module) if the phone
is registered with multiple service providers:
is registered with multiple service providers:
1. Press
[MENU]
, 2
times, , .
2. Use
to select a setting, then press
.
NAM1 / NAM2
A confirmation message is displayed briefly before the phone resets
itself.
itself.
6. Call Settings
The Call Setup menu allows you to designate how the phone handles
both incoming and outgoing calls.
both incoming and outgoing calls.
Access and Options
1. Press
[MENU]
.
2. Press
2 times to select [Settings & Tools].
3. Press
Call Settings
.