EchoStar d-2510 ip viaccess Manuel D’Utilisation

To get the most out of the EchoStar D-2510IP VIACCESS it should be correctly installed, the dish should
be optimally aligned and the mechanical limit switched on the dish should be set properly. Press      /I   on
the remote control unit (RCU) or press       on the front panel of the EchoStar D-2510IP VIACCESS to
switch the unit on.

12

After selecting the language settings, the ”LNB Setting” menu will be shown. Please follow the steps outlined
below to properly install the EchoStar D-2510IP VIACCESS.

You can select the desired language for the OSG (On-
Screen Graphics) display using the  ,   keys when the
“Menu Language” option is selected. Similarly you can
selected a different audio channel when the “Audio
Language” option is selected. This option allows you to
select a different language to listen to if supported.

Select the LNB type which conforms to your LN
B using the  ,   keys.

Other parameter values should be changed
manually according to your LNB type.
Press the OK key to confirm your selection.

Select the “LNB Setting” menu in the “Installation” m
enu using the  , keys.

If you have a Mechanical Polarizer with your LNB, you have to set the “Polarity Control” parameter in this
menu to [Polarotor].

×     Type 1     Ø

×      English     Ø