Yamaha RX-Z9 Mode D'Emploi
CONTROLS AND FUNCTIONS
6
0
MULTI JOG
Rotate to select or adjust items when used with the DSP
PROGRAM, PRESET/TUNING, BALANCE or TONE
CONTROL buttons.
PROGRAM, PRESET/TUNING, BALANCE or TONE
CONTROL buttons.
A
BALANCE
Adjusts the left/right balance of the front, presence,
surround and surround back speakers.
surround and surround back speakers.
B
TONE CONTROL
Press this button before rotating MULTI JOG to adjust the
bass/treble balance for the front left/right, center and
subwoofer channels (see page 40).
bass/treble balance for the front left/right, center and
subwoofer channels (see page 40).
C
VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
This does not affect the REC OUT level.
D
SPEAKERS A/B
Turns on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
and/or B terminals on the rear panel each time the
corresponding button is pressed.
E
PHONES jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the OUTPUT jacks or to the speakers.
headphones. When you connect headphones, no signals
are output to the OUTPUT jacks or to the speakers.
F
OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for the AUTO SETUP function (see page 33).
microphone for the AUTO SETUP function (see page 33).
G
REC OUT/ZONE 2
Selects the source you want to direct to the audio/video
recorder and ZONE 2 outputs independently of the source
you are listening to or watching in the main room. When
set to the SOURCE/REMOTE position, the input source is
directed to all outputs. The source in Zone 2 and the
source you record are always identical.
recorder and ZONE 2 outputs independently of the source
you are listening to or watching in the main room. When
set to the SOURCE/REMOTE position, the input source is
directed to all outputs. The source in Zone 2 and the
source you record are always identical.
H
VIDEO AUX jacks
Inputs audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
I
TUNING MODE
Switches the tuning mode between automatic (“AUTO”
indicator on) and manual (“AUTO” indicator off).
indicator on) and manual (“AUTO” indicator off).
J
MEMORY
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
more than 3 seconds to start automatic preset tuning.
K
FM/AM
Switches the reception band between FM and AM.
L
PRESET/TUNING
Selects preset station number 1 to 8 when the colon (:) is
displayed next to the band indication in the front panel
display.
Selects the tuning frequency when the colon (:) is not
displayed.
displayed next to the band indication in the front panel
display.
Selects the tuning frequency when the colon (:) is not
displayed.
■
Opening and closing the front panel
door
door
When you want to use the controls behind the front panel
door, open the door by gently pressing on the lower part of
the panel. Keep the door closed when not using these
controls.
door, open the door by gently pressing on the lower part of
the panel. Keep the door closed when not using these
controls.
To open, press gently on the lower part of the panel.
00EN.00_RXZ9_U.book Page 6 Friday, October 17, 2003 11:40 AM