Acronis Acronis True Image Home 2010 TIHPB2ENS Manuel D’Utilisation
Codes de produits
TIHPB2ENS
Copyright © Acronis, Inc., 2000-2009
87
One more recommendation - it is highly recommended to install the new hard drive to the same
position in the computer and use the same cable and the same connector as for the original drive
(though this is not always possible, e.g. the old drive may be an IDE and the new drive may be a
SATA). In any case, install the new drive to where it will be used.
position in the computer and use the same cable and the same connector as for the original drive
(though this is not always possible, e.g. the old drive may be an IDE and the new drive may be a
SATA). In any case, install the new drive to where it will be used.
10.2.1. Recovering a disk without a hidden partition
At first let's consider recovery of a system disk containing two partitions (none of them hidden) using
a disk backup. In addition, we assume that the system disk does not contain a recovery partition
which may not be hidden. If the disk contains, for example, three partitions, the procedure will be
similar. We will describe recovery using the rescue media (as this approach usually gives the best
recovery results).
a disk backup. In addition, we assume that the system disk does not contain a recovery partition
which may not be hidden. If the disk contains, for example, three partitions, the procedure will be
similar. We will describe recovery using the rescue media (as this approach usually gives the best
recovery results).
Attach the external drive if it contains the backup archive to be used for recovery and make sure that the drive is
powered on. This must be done before booting from Acronis rescue media.
powered on. This must be done before booting from Acronis rescue media.
1. Arrange the boot sequence in BIOS so as to make your rescue media device (CD, DVD or USB
stick) the first boot device. See Arranging boot sequence in BIOS (p. 192).
2. Boot from the rescue media and select Acronis True Image Home (Full version).
3. Select Recovery Disk and Partition Recovery in the main menu, then choose the image backup
of your system disk that you want to use for recovery.
If the disks have different disk letters in Windows and the recovery environment, the program
will display the following error message: "Acronis True Image Home cannot detect volume N of
"Name" archive", where Name is the name of the required image backup archive and volume
number (N) may be different depending on the number of backups in the archive. Click Browse
and show the path to the archive.
If the disks have different disk letters in Windows and the recovery environment, the program
will display the following error message: "Acronis True Image Home cannot detect volume N of
"Name" archive", where Name is the name of the required image backup archive and volume
number (N) may be different depending on the number of backups in the archive. Click Browse
and show the path to the archive.
4. Select Recover whole disks and partitions at the Recovery method step.
5. At the What to recover step select the boxes of the partitions to be recovered. Do not select the
MBR and Track 0 box, as this will result in selecting the entire disk for recovery. Recovering the
entire disk does not allow you to resize partitions manually. If necessary, you can recover the
MBR later. Select the partitions and click Next.
Selecting partitions leads to appearance of the relevant steps "Settings of partition ...". Take note
that these steps are in ascending partition drive letter order and that this order cannot be
changed. The order may differ from the physical order of the partitions on the hard disk. In the
case being considered (no hidden or recovery partitions), the physical order of the partitions on
the new disk does not have special importance as Acronis True Image Home automatically fixes
the appropriate Windows loader files.
Incidentally, this step allows you to find out whether the disk you are going to recover contains a
hidden partition. Hidden partitions do not have disk letters and they go first in the "Settings of
partition ..." steps. If you find a hidden partition, see Recovering a disk with a hidden partition (p.
88).
entire disk does not allow you to resize partitions manually. If necessary, you can recover the
MBR later. Select the partitions and click Next.
Selecting partitions leads to appearance of the relevant steps "Settings of partition ...". Take note
that these steps are in ascending partition drive letter order and that this order cannot be
changed. The order may differ from the physical order of the partitions on the hard disk. In the
case being considered (no hidden or recovery partitions), the physical order of the partitions on
the new disk does not have special importance as Acronis True Image Home automatically fixes
the appropriate Windows loader files.
Incidentally, this step allows you to find out whether the disk you are going to recover contains a
hidden partition. Hidden partitions do not have disk letters and they go first in the "Settings of
partition ..." steps. If you find a hidden partition, see Recovering a disk with a hidden partition (p.
88).
6. You can specify the following partition settings: location, type, and size. Most likely you will first
specify the settings of the system partition as it usually has the letter C. Because you are
recovering to the new disk, click New location. Select the destination disk by either its assigned
name or capacity.
If you have not assigned names to the disks and have any doubts when selecting the destination
disk, you may abort the recovery by clicking Cancel and try to identify the target disk by its model
number, interface, etc. To see this information, select Tools & Utilities
recovering to the new disk, click New location. Select the destination disk by either its assigned
name or capacity.
If you have not assigned names to the disks and have any doubts when selecting the destination
disk, you may abort the recovery by clicking Cancel and try to identify the target disk by its model
number, interface, etc. To see this information, select Tools & Utilities
Add New Disk in the
main menu and the Disk selection screen will show the information. Use it for identifying the