Zhone 2000 Mode D'Emploi

To display information about the data in the DNS cache, type “S” on the 

DNS Client menu. When DNS Client is enabled, the IAD displays the 
information shown below.

Press any key to return to the DNS Client menu when you have finished 
reviewing the information.

Type “H” on the Router Configuration menu (Figure 4.51) to select 

Configure DHCP Client. If more than one WAN port is installed or more 

than one PVC or DLCI exists, the IAD displays the available interfaces 

(sample shown in Figure 4.52):

Type the interface number to set. The IAD displays the port table for this 

interface and prompts you for a port number.

Type the port to set and press Enter. The IAD displays the status of the 

selected slot and port, and prompts you to change it.

Type “E” to enable DHCP Client on this port, or “D” to disable it. The 

IAD saves the changes and displays the Router Configuration menu (Figure 

4.51). Repeat these steps for each remaining port.

Continue with other configuration tasks, or press Escape to return to the 

Main menu.

DHCP Relay allows the IAD to forward DHCP requests from the LAN to a 
separate DHCP Server. To configure the IAD for DHCP Relay, type “L” on 

the Router Configuration menu (Figure 4.51). The IAD displays the DHCP 
Relay menu (Figure 4.55), which contains commands to configure DHCP 
Relay: