Zhone 2000 Manuel D’Utilisation

- 95 -

The JF2304 and JF2308 contain a number of predefined configurations for 
physical connections and PVCs. 

To use one of the predefined configurations:

1. On the Main menu, type 5 to select Configure WAN. 
2. The IAD displays the WAN Configuration menu.

Type 0 to select Quick Configuration. 

3. The IAD displays the Quick Configuration menu.

4. Type the option corresponding to the DSLAM to which the IAD is 

connected.

5. The IAD automatically resets.
6. To continue configuration, log back on to the IAD.

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

The Quick Configuration option is displayed only on the 
JF2304 and JF2308.

*****************************************

*

WAN Configuration menu

*

*****************************************

Configuring SDSL

0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface

*****************************************

Quick Configuration

*****************************************

** System will reset after changing configuration **

Current configuration:
Differs from listed configurations

1. Lucent Stinger (Conexant Autobaud, Payload 
Scrambling)
2. Nokia (Auto Cycle)
3. Coppermountain (Auto Sense)
4. Paradyne (Unframed 784kbps, Payload Scrambling)
5. AccessLan CPE
6. ATM (Unframed, 1152kbps fixed)
7. Frame Relay (784kbps fixed)