Zhone 5100 Mode D'Emploi
CHAPTER 4
Settings options
Settings options
52
Vpacket 5100/6100 Series Web Interface Manual
Enabling and disabling network address translation
The network address translation (NAT) protocol is enabled during the initialization process if a
valid WAN IP address is set. Otherwise NAT is disabled.
NAT allows the WAN IP address to accept an appended port number on outgoing packets.
This window allows you to enable or disable the NAT settings.
NAT allows the WAN IP address to accept an appended port number on outgoing packets.
This window allows you to enable or disable the NAT settings.
To enable or disable NAT
1. Click settings and then nat.
2. Select the Enable or Disable radio button.
3. Select the interface that NAT will be enabled on (either WAN or loopback).
4. Click Submit.
2. Select the Enable or Disable radio button.
3. Select the interface that NAT will be enabled on (either WAN or loopback).
4. Click Submit.
Figure 4-27. NAT Settings window
To view a port map
1. Click settings and then nat.
2. From the Select NAT IP Mapping Option pull-down menu, select IP Port Mapping.
NAT IP Port Mapping entries appear in a table. From this table you can add or delete an entry.
2. From the Select NAT IP Mapping Option pull-down menu, select IP Port Mapping.
NAT IP Port Mapping entries appear in a table. From this table you can add or delete an entry.