Zhone 6212-a2 Mode D'Emploi
1. Introduction
6212-A2-GB22-00
January 2005
1-3
LED Description (Front Panel)
Power LED: On indicates that the power is supplied to the router.
Status LED: The Status LED serves two purposes. If the LED is continuously
lit, the DSL interface is successfully connected to a device through the LINE
port. If the LED is flickering, it is an indication that the router is training
(negotiating the connection to its partner modem).
lit, the DSL interface is successfully connected to a device through the LINE
port. If the LED is flickering, it is an indication that the router is training
(negotiating the connection to its partner modem).
Activity LED: The Activity LED shows the state of the PPPoA or PPPoE
connection. Off: no PPP connection is established or the connection is not
used. Blinking: a PPP connection is being attempted. Solid green: a PPP
connection is established. Flickering: there is activity over the link.
connection. Off: no PPP connection is established or the connection is not
used. Blinking: a PPP connection is being attempted. Solid green: a PPP
connection is established. Flickering: there is activity over the link.
LAN 1–4 LED: The LAN LED serves two purposes. If the LED is continuously
lit, the Ethernet interface is successfully connected to a device through the
LAN port. If the LED is flickering, it is an indication of network activity.
lit, the Ethernet interface is successfully connected to a device through the
LAN port. If the LED is flickering, it is an indication of network activity.
Packing List
Your router is shipped with the following:
Power adapter
Ethernet cable (RJ45, straight-through wiring)
Phone cable (RJ11)
CD-ROM containing this manual
04-17577
1
LAN
POWER STATUS ACTIVITY
2
3
4