Zhone 6300 Manuel D’Utilisation
A. Command Line Interface
6300-A2-GB20-10
November 2003
A-33
show system
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Sample show system display:
March 23009:53:26 2001
System ID: xxxxxxxx
Model #: xxxx, Serial #: xxxxxxxxxxxx, HW-Rev: xxx
Boot: FW-Version xxxxxxxx
2nd Stage Boot: FW-Version xxxxxxxx
Image 0: FW-Version xxxxxxxx, [active]
Image 1: FW-Version xxxxxxxx
DSP: FW-Version xxx
Selftest Result: [0xxxxx ] (if failed) {pass
| fail}
show telnet
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Sample show telnet display:
Telnet - {enabled
| disabled}
Telnet login - {enabled
| disabled}
Telnet keep-alive - {enabled
| disabled}
Telnet keep-alive interval: xxxxxx seconds
Telnet keep-alive timeout: xxx minutes
Telnet disconnect timeout: xx minutes
login ID access level
xxxx {admin
| operator}
show traps
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Sample show traps display:
warmstart {enabled
| disabled}
authen fail {enabled
| disabled}
selftest {enabled
| disabled}
devfail {enabled
| disabled}
test start {enabled
| disabled}
test stop {enabled
| disabled}
ccn {enabled
| disabled}
link up {enabled
| disabled}
link down {enabled
| disabled}
Table A-17. Show Commands (10 of 10)