Zenith a50m84w Mode D’Emploi
I N S TA L L AT I O N S TA N DA R D
P A G E 6
206-3359-O
Connecting a
VCR to your
Entertainment
Machine.
Hook Up Your VCR and Cable
ANTENNA
CABLE 1
VARIABLE OUT
TV back
In
Out
Audio
Video
3 4
VCR
Back AV panel
R- AUDIO- L
A/V cables
not included
with TV
not included
with TV
Cable TV
wall jack
wall jack
Round wire
(75 ohm)
(75 ohm)
VIDEO 1
Output
L
R
Locate the RF or VHF/UHF/CATV
In jack on the back of your
VCR. Connect the cable line
coming from your wall directly
to this jack.
In jack on the back of your
VCR. Connect the cable line
coming from your wall directly
to this jack.
Find the composite video and
audio jacks on the
back of your VCR, and
connect them following
the instructions provided with
your equipment.
audio jacks on the
back of your VCR, and
connect them following
the instructions provided with
your equipment.
The cords should be included
with your VCR.
with your VCR.
To use with PIP: go to the
source menu (see page 23) and
choose the jack that you’ve con-
nected your VCR to (Video 1) as
the Main or PIP source.
source menu (see page 23) and
choose the jack that you’ve con-
nected your VCR to (Video 1) as
the Main or PIP source.
If you want to receive your sig-
nals on channel 3 or 4, locate
the Out to TV jack. Connect a
cable from that jack to the
Antenna/Cable jack on the back
of your Entertainment Machine.
nals on channel 3 or 4, locate
the Out to TV jack. Connect a
cable from that jack to the
Antenna/Cable jack on the back
of your Entertainment Machine.
1
2
RF coaxial wire
(75 ohm)
(75 ohm)
Antenna
OR