Zenith p42w24b Mode D’Emploi

30

• Adjust 

in the 

menu. (Refer to p.15)

• A change in ambient humidity or temperature may result in an unusual noise

at the time of switching off or on of the monitor and does not indicate a fault
with the monitor.

• Check whether the Monitor is turned on.

• Power cord inserted into wall outlet?

• Test the wall power outlet, plug other product’s power cord into the wall outlet

where the Monitor’s power cord was plugged in.

• Select 

in the 

menu and press the VOLUME (

G

) button. 

(Refer to p.14)

• Keep a certain distance between the Monitor and the VCR.

• Activate any function to restore the brightness of the picture. 

(If still picture is on the screen for more than 5 minutes, the screen gets dark.) 

• Check to see if there is any object between the Plasma Display and the

remote control causing obstruction.

• Are batteries installed with correct polarity (+ to +, - to -)? 

(Refer to p.11) 

• Install new batteries. (Refer to p.11)

• Press the VOLUME (

G

) button.

• Sound muted? Press MUTE button.

• This is normal as the image is muted during the startup process of the moni-

tor. Please contact your service centre,if the picture has not appeared after
five minutes.

• Check for local interference such as an electrical appliance or power tool.