Zebra 140xi Mode D'Emploi
37
ZPL Forms Mode
6/12/06
KDU Plus User’s Manual
980548-001 Rev. A
The KDU Plus may display a ‘Processing Form ..’ when loading and parsing form
commands.
commands.
If a form has the number of print quantity specified from within the ZPL form with the
Print Quantity command (denoted by the ^PQ) from within the form, then the KDU Plus
will display ‘Auto printing’ for two seconds and start printing.
Print Quantity command (denoted by the ^PQ) from within the form, then the KDU Plus
will display ‘Auto printing’ for two seconds and start printing.
When the form has finished printing, the KDU Plus will return to the main forms menu.
If the form does not have the print quantity specified with the Print Quantity command
within the form, then the operator will be prompted to enter the ‘Total quantity of labels to
print’.
within the form, then the operator will be prompted to enter the ‘Total quantity of labels to
print’.
The operator can change the quantity and press the Enter key. The printer will print the form.
If the form also contains at least one Serial Number command (denoted by ^SN), then the
KDU Plus will display ‘Copies of each serial number?’.
KDU Plus will display ‘Copies of each serial number?’.
•
The operator can press the Enter key again to repeat the form print, change the
quantity again and print, or press the Exit or Esc keys to exit form operations.
quantity again and print, or press the Exit or Esc keys to exit form operations.
•
Press the Clr key to clear the quantity entry shown.
•
The right and left arrow keys, Del key and the Backspace keys are active during
Forms Mode.
Forms Mode.
•
Press the Exit or Esc keys at any time to quit form retrieval or form data entry.