ZyXEL NBG-318S Mode D'Emploi

Chapter 8 HomePlug AV

NBG-318S User’s Guide

Click on Network > HomePlug > Edit to see the screen below. Use this screen to add a new 
HomePlug AV device to the network. You can also edit a device’s details.

Figure 59   Network > HomePlug > Edit 

The following table describes the labels in the screen.

Table 41   Network > HomePlug > Edit 

Device Information

Nickname

Type a name you wish to use to identify a specific powerline 

adapter, for example, “Bob’s room”.

MAC Address

This is the MAC address of the HomePlug AV device. The MAC 

Address will appear in this field if the device’s status is either Active 

or Not Member. If the device’s status is Out of Network or your 

NBG-318S can not detect it, type the MAC Address here.

DAK Password

The DAK Password (DAK stands for Device Access Key), is used 

to verify that you are authorized to perform changes on a device. 

You can find the DAK printed on a sticker on the bottom of a 

HomePlug enabled device.

Apply

Click this button to apply add the device to the network or to apply 

your changes.

Cancel

Click this button to return to the previous screen.

Member Action

This field shows the Edit icon and the Delete icon. Click on Edit to 

add a device to the network or to edit details such as the device’s 

Nickname. Click on Delete to remove the device from the network.
If you want to set up a second network, remove the devices from My 

HomePlug Network that you want to keep in your first network 

before you set the new Network Name for the second network.

Scan

Click Scan to detect devices on the same electrical circuit as the 

NBG-318S.