ZyXEL P-663H-51 Mode D'Emploi
Chapter 10 Routing
P-663H-51 User’s Guide
98
10.2 Static Route
The ZyXEL Device usually uses the default gateway to route outbound traffic from local
computers to the Internet. To have the ZyXEL Device send data to devices not reachable
through the default gateway, use static routes.
computers to the Internet. To have the ZyXEL Device send data to devices not reachable
through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL Device’s LAN
interface. The ZyXEL Device routes most traffic from A to the Internet through the default
gateway (R1). You create one static route to connect to services offered by your ISP behind
router R2. You create another static route to communicate with a separate network behind a
router (R3) connected to the LAN.
interface. The ZyXEL Device routes most traffic from A to the Internet through the default
gateway (R1). You create one static route to connect to services offered by your ISP behind
router R2. You create another static route to communicate with a separate network behind a
router (R3) connected to the LAN.
Figure 54 Example of Static Routing Topology
10.3 Configuring Static Route
Click Advanced > Routing > Static Route to open the Static Route screen.
Figure 55 Advanced > Routing > Static Route
WAN
R1
R2
A
R3
LAN