ZyXEL 2WG Mode D'Emploi
Chapter 11 Wi-Fi Screens
ZyWALL 2WG User’s Guide
225
For example, if the wireless network has a RADIUS server, you can choose WPA or WPA2. If
users do not log in to the wireless network, you can choose no encryption, Static WEP, WPA-
PSK, or WPA2-PSK.
users do not log in to the wireless network, you can choose no encryption, Static WEP, WPA-
PSK, or WPA2-PSK.
Usually, you should set up the strongest encryption that every wireless client in the wireless
network supports. For example, suppose the AP does not have a local user database, and you
do not have a RADIUS server. Therefore, there is no user authentication. Suppose the wireless
network has two wireless clients. Device A only supports WEP, and device B supports WEP
and WPA. Therefore, you should set up Static WEP in the wireless network.
network supports. For example, suppose the AP does not have a local user database, and you
do not have a RADIUS server. Therefore, there is no user authentication. Suppose the wireless
network has two wireless clients. Device A only supports WEP, and device B supports WEP
and WPA. Therefore, you should set up Static WEP in the wireless network.
"
It is not possible to use WPA-PSK, WPA or stronger encryption with a local
user database. In this case, it is better to set up stronger encryption with no
authentication than to set up weaker encryption with the local user database.
user database. In this case, it is better to set up stronger encryption with no
authentication than to set up weaker encryption with the local user database.
"
It is recommended that wireless clients use WPA-PSK, WPA, or stronger
encryption. IEEE 802.1x and WEP encryption are better than none at all, but it
is still possible for unauthorized devices to figure out the original information
pretty quickly.
encryption. IEEE 802.1x and WEP encryption are better than none at all, but it
is still possible for unauthorized devices to figure out the original information
pretty quickly.
11.2 The Wireless Card Screen
If you are configuring the ZyWALL from a computer connected to the wireless LAN and you
change the ZyWALL’s SSID or security settings, you will lose your wireless connection when
you press Apply to confirm. You must then change the wireless settings of your computer to
match the ZyWALL’s new settings.
Click WIRELESS > Wi-Fi to open the Wireless Card screen.
change the ZyWALL’s SSID or security settings, you will lose your wireless connection when
you press Apply to confirm. You must then change the wireless settings of your computer to
match the ZyWALL’s new settings.
Click WIRELESS > Wi-Fi to open the Wireless Card screen.