ZyXEL p-660h-61 Mode D'Emploi
Prestige 660H Series User’s Guide
Introducing the SMT
20-3
Table 20-1 Main Menu Commands
OPERATION KEYSTROKE
DESCRIPTION
Move to a “hidden”
menu
menu
Press [SPACE
BAR] to change No
to Yes then press
[ENTER].
BAR] to change No
to Yes then press
[ENTER].
Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [SPACE BAR] once to change No to
Yes, then press [ENTER] to go to the “hidden” menu.
default setting of No. Press [SPACE BAR] once to change No to
Yes, then press [ENTER] to go to the “hidden” menu.
Move the cursor
[ENTER] or
[UP]/[DOWN] arrow
keys.
[UP]/[DOWN] arrow
keys.
Within a menu, press [ENTER] to move to the next field. You can
also use the [UP]/[DOWN] arrow keys to move to the previous and
the next field, respectively.
also use the [UP]/[DOWN] arrow keys to move to the previous and
the next field, respectively.
Entering
information
information
Type in or press
[SPACE BAR], then
press [ENTER].
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
Required fields
<
?
> or ChangeMe All fields with the symbol <?> must be filled in order to be able to
save the new configuration.
All fields with ChangeMe must not be left blank in order to be able
to save the new configuration.
to save the new configuration.
N/A fields
<N/A>
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
refers to an option that is Not Applicable.
Save your
configuration
configuration
[ENTER]
Save your configuration by pressing [ENTER] at the message
“Press ENTER to confirm or ESC to cancel”. Saving the data on the
screen will take you, in most cases to the previous menu.
“Press ENTER to confirm or ESC to cancel”. Saving the data on the
screen will take you, in most cases to the previous menu.
Exit the SMT
Type 99, then press
[ENTER].
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
SMT interface.
After you enter the password, the SMT displays the main menu, as shown next.
Figure 20-3 SMT Main Menu
20.2.1 System Management Terminal Interface Summary
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
Prestige 660H-61 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
2. WAN Backup Setup 22. SNMP Configuration
3. LAN Setup 23. System Security
4. Internet Access Setup 24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup 99. Exit
15. NAT Setup
Enter Menu Selection Number: