ZyXEL p-660h-61 Mode D'Emploi
Prestige 660H Series User’s Guide
Wizard Setup
3-11
Table 3-6 Wizard: LAN Configuration
LABEL
DESCRIPTION
LAN IP Address
Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
192.168.1.1 (factory default).
If you changed the Prestige's LAN IP
address, you must use the new IP address if
you want to access the web configurator
again.
you want to access the web configurator
again.
LAN Subnet Mask
Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server
From the DHCP Server drop-down list box, select On to allow your Prestige to assign
IP addresses, an IP default gateway and DNS servers to computer systems that
support the DHCP client. Select Off to disable DHCP server.
IP addresses, an IP default gateway and DNS servers to computer systems that
support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
Client IP Pool Starting
Address
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP Pool
This field specifies the size or count of the IP address pool.
Primary DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server
As above.
Back
Click Back to go back to the previous screen.
Finish
Click Finish to save the settings and proceed to the next wizard screen.
3.13 Wizard Setup Configuration: Connection Tests
The Prestige automatically tests the connection to the computer(s) connected to the LAN ports. To test
the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main
Menu to go back to the Site Map screen.
the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main
Menu to go back to the Site Map screen.