ZyXEL 35 Guide D’Installation Rapide

ENGLISH

4

5 Look at the front panel. The PWR LED turns on. The SYS LED blinks while performing system testing and 

then stays on if the testing is successful. The ACT, CARD, LAN/DMZ and WAN LEDs turn on and stay on 
if the corresponding connections are properly made.

Use this section to configure the WAN 1 interface for Internet access.

5 The HOME screen opens.

The ZyWALL is in router mode by default. Continue to the next step if you want to use routing features 
such as NAT, DHCP and VPN. 

Go to 

 if you prefer to use the ZyWALL as a transparent firewall.

1 Launch your web browser. Enter 192.168.1.1 (the 

ZyWALL’s default IP address) as the address. 
If the login screen does not display, see 

 to set your computer’s IP address. 

2 Click Login (the default password 1234 is already 

entered).  

3 Change the login password by entering a new 

password and clicking Apply. 

4 Click Apply to replace the ZyWALL’s default 

digital certificate.