ZyXEL nbg-4615 Mode D'Emploi
Chapter 14 Wireless LAN
NBG4615 User’s Guide
146
14.10 WDS Screen
A Wireless Distribution System (WDS) is a wireless connection between two or
more APs. Use this screen to set the operating mode of your NBG4615 to AP +
Bridge or Bridge and establish wireless links with other APs. You need to know
the MAC address of the peer device, which also must be in bridge mode.
more APs. Use this screen to set the operating mode of your NBG4615 to AP +
Bridge or Bridge and establish wireless links with other APs. You need to know
the MAC address of the peer device, which also must be in bridge mode.
Note: You must enable the same wireless security settings on the NBG4615 and on
all wireless clients that you want to associate with it.
Click Network > Wireless LAN > WDS tab. The following screen opens with the
Basic Setting set to Disabled, and Security Mode set to No Security.
Basic Setting set to Disabled, and Security Mode set to No Security.
Figure 85 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 52 Network > Wireless LAN > WDS
LABEL
DESCRIPTION
WDS Setup
Basic Settings
Basic Settings
Select the operating mode for your NBG4615.
• Disable - The NBG4615 works as an access point only and cannot
establish wireless links with other APs.
• AP + Bridge -
The NBG4615 functions as a bridge and access point
simultaneously.
• Bridge - The NBG4615 acts as a wireless network bridge and
establishes wireless links with other APs.
You need to know the MAC address of the peer device, which also must
be in bridge mode. The NBG4615 can establish up to five wireless links
with other APs.
be in bridge mode. The NBG4615 can establish up to five wireless links
with other APs.
Local MAC
Address
Address
This is the MAC address of your NBG4615.